1986 Holden Brock HDT VL Group A SS
Fast becoming an extremely sought after collectible Australian muscle car between enthusiasts and collectors, this particular vehicle is no exception.
Built in November 1986 and being HDT build number 360/500 (3905) with matching numbers, this is an excellent and original example of an Australian motoring icon. Complete with books, HDT Authenticity Certificate, HDT documentation etc.
Covering just over 90,000kms over it's 32 year lifespan, this is a low kilometer example that retains its exceptional originality.
4.987 Litre V8 Overhead valve, 2 valves per cylinder. Bore x Stroke (mm): 101.6 x 76.8. Compression ratio: 8.5:1. Max Power: (DIN)137kw @ 4400rpm and 345nm at 3200rpm. Max recommended rpm 5600.
Port matched inlet manifold and four barrel Rochester carburettor with cold air induction.
Borg Warner T5G 5 Speed Manual.
Borg Warner 4 Pinion limited slip differential. 3.08:1 Final drive ratio.
Single Dry Plate.
Power assisted Rack & Pinion.
Front: Fully independent. Macpherson struts with coil springs and anti-roll bar.
Rear: Live axle located by trailing arms and Panhard rod. Coil springs and anti-roll bar.
Bilstein gas-pressurised shock absorbers all round.
Power assisted front and rear discs.
Front: 289mm Ventilated discs.
Rear: 280mm discs.
WHEELS & TYRES
16″ x 7″ Momo star rims, Bridgestone Potenza RE71 205/55 VR16s. 16×8″ Momos were optional.
0-100: 7.64 seconds.
400m: 15.54 @ 141.7 best time according to Motor Magazine. Average 15.68 @ 139.8 km/h.
500. Approximately 173 of these were Plus Packs.
Available for your personal viewing at our state-of-the-art showroom.
We can arrange door to door delivery Australia-wide and welcome your trade-in.
Finance - our broker offers VERY competitive rates and impressive service.
|Model:||HDT Brock VL Group A SS|